MAR Inc Logo Midwest Aircraft Refinishing Inc.

Limited Cirrus Authorized Service Center

Previous Projects



 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This is a list of projects and types of work we have done before. By clicking on the pictures you can view a page with more photos of the project.

 

This project was a total aircraft exterior re-paint. This Aircraft was in extremely poor condition and now has a flawless exterior. The Aircraft gained 4 knots TAS after being refinished.

The customer was very satisfied.

This small project was to address some minor corrosion on the elevators, steps, and grab handles as well as fix some cracks in the Cowling. We powder coated the steps and grab handles and put a very durable non-skid material on the steps.

2
1

This is a total paint job on an RV8A.

2
1

This project was to totally re-paint a 2005 SR22 TURBO with a total custom, red and white two tone scheme with painted on graphics and N numbers.

2
1

We also do work on Cessna's as well.

2
1

This is a paint job on an SR22, customer also wanted work done on the interior.

2
1

We were very honored to be able to paint this all new Kestrel airplane.

2
1

This project was to re-paint a 2005 SR22 Turbo with all painted on custom scheme, graphics and N#. There is no Vinyl decals on this Aircraft. All of the paint lines are flush and cannot be felt.

2
1

This was a total paint job, interior, and avionics upgrade.

2
1

This was a custom paint job on a RV8.

2
1

This Project was to bodywork some major composite repairs and re-paint the entire aircraft to make the repairs undetectable. We painted on all of the graphics and N#'s flush and cleared over so none of the lines can be felt.

2
1

This Project was to strip and repaint a Cessna 172 before it went on floats. Our process includes aluminum masking tape over all windows and exposed areas to prevent any damage or corrosion. We use an acid etch and epoxy primer to ensure a long life to the paint. Paint lines are painted flush and clear-coated over so none of the lines can be felt.

2
1

This project was to repaint a 2006 SR22 with a 2011 factory scheme. We used Custom vinyl from Air Graphics.

2
1

 

   

Midwest Aircraft Refinishing Inc.
218-262-9007

contact@midwestaircraftrefinishing.com


PPG Logo



© Copyright 2011 Midwest Aircraft Refinishing Inc.